Problem

Related:
Create New Tag

9/3/2012 8:10 PM

I got a bsd backstreet hub the one with female axles & noticed when i put the wheel on & hold the seat pick up the back wheel, i noticed i can feel it spinning. It feels horrible & i cant figure out whats wrong with because i cant figure out how to get driver off. Also, when the bike is flipped over & he back wheel is on tight, i notice i can wobble it back & fourth also. Did anyone else have this problem with female axle hubs?

|

[LINK TO IMAGE]">


]Refs- Dirt Nasty, RideBmxWithSWAG, FOUR, Ron44ald, TCbmx(x2), Manny5569, JMIES419, aw1234512(x2), the balt, Spikez5(x2), ecuadevil(x2), Showtime402, RiverSideRider

9/3/2012 8:18 PM

I'm probably wrong, but from how you described that, I'd think your driver/cone nut isn't on tight.

|

Lol. Xzibit plz
Shakesman69: Seeing a girl on a bike is like seeing a unicorn walking down the main street.
Brokenbmx: i pooped butterflies once.


Bought from: Ridebmx456 TCbmx(x2) Wade., Ticaleb
Sold to: Sprocket: Mike - E, Front Hub: Kroller, Back wheel: imgoingtohavetocuthere
Local deal for a rear wheel with: bmx

9/3/2012 8:28 PM

it doesnt have a cone washer & it doesnt need adapters either

|

[LINK TO IMAGE]">


]Refs- Dirt Nasty, RideBmxWithSWAG, FOUR, Ron44ald, TCbmx(x2), Manny5569, JMIES419, aw1234512(x2), the balt, Spikez5(x2), ecuadevil(x2), Showtime402, RiverSideRider

9/3/2012 8:53 PM

can no one help me :/

|

[LINK TO IMAGE]">


]Refs- Dirt Nasty, RideBmxWithSWAG, FOUR, Ron44ald, TCbmx(x2), Manny5569, JMIES419, aw1234512(x2), the balt, Spikez5(x2), ecuadevil(x2), Showtime402, RiverSideRider

9/3/2012 9:01 PM

i can only show the wobble in the wheel i cant show the feeling the wheel spin through the frame lol

|

[LINK TO IMAGE]">


]Refs- Dirt Nasty, RideBmxWithSWAG, FOUR, Ron44ald, TCbmx(x2), Manny5569, JMIES419, aw1234512(x2), the balt, Spikez5(x2), ecuadevil(x2), Showtime402, RiverSideRider

9/3/2012 9:10 PM

I have a backstreet... Can you describe it a little more? I'm just having trouble picturing what is going on...

|

RIP 71 N
RIP Randy Taylor


Shadow/Subrosa

Tumblr | Instagram | Digits - (407) 655-6998 | Email - kyzem.leahcim@yahoo.com | Xbox - eleswun

9/3/2012 9:19 PM

i made a video one sec

|

[LINK TO IMAGE]">


]Refs- Dirt Nasty, RideBmxWithSWAG, FOUR, Ron44ald, TCbmx(x2), Manny5569, JMIES419, aw1234512(x2), the balt, Spikez5(x2), ecuadevil(x2), Showtime402, RiverSideRider

9/3/2012 10:03 PM

finally uploaded

|

[LINK TO IMAGE]">


]Refs- Dirt Nasty, RideBmxWithSWAG, FOUR, Ron44ald, TCbmx(x2), Manny5569, JMIES419, aw1234512(x2), the balt, Spikez5(x2), ecuadevil(x2), Showtime402, RiverSideRider

9/3/2012 10:21 PM

Loose spokes?

|

9/3/2012 10:23 PM

BNC wrote:

Loose spokes?

no their all tight

|

[LINK TO IMAGE]">


]Refs- Dirt Nasty, RideBmxWithSWAG, FOUR, Ron44ald, TCbmx(x2), Manny5569, JMIES419, aw1234512(x2), the balt, Spikez5(x2), ecuadevil(x2), Showtime402, RiverSideRider

9/3/2012 10:36 PM

Get a flat screwdriver and try to fit it in between the hub and cone washers or driver's locknut, turn the screwdriver sideways and pull out the cones and inspect inside

|

2Hi throwaway



Anti-street?

NEWER VIDEO





TRV-950 Footy






Holy shit Chad Degroot posted in my Good porn thread!


VX all day(fixed, raw video, real shit)


Refs: Stayinonmagrind, Dee hos, Kevin Burnett

9/3/2012 11:33 PM

so just an update i figured out how to force driver off & all internals look good i even popped out the beaings & cleaned them & then but it back together i can still feel it through the chainstay but i dont believe it wobs anymore but ill keep you updated cant ride tonight because its to late but ill keep you guys updated

|

[LINK TO IMAGE]">


]Refs- Dirt Nasty, RideBmxWithSWAG, FOUR, Ron44ald, TCbmx(x2), Manny5569, JMIES419, aw1234512(x2), the balt, Spikez5(x2), ecuadevil(x2), Showtime402, RiverSideRider

9/4/2012 10:22 AM

Factory Deffect? I don't remember ever having mine do that, i have the female axle as well.... but, your right there was a noticable movement/wobble.... if it were me, i might send the video or maybe just try and contact BSD about it....

|

RIP 71 N
RIP Randy Taylor


Shadow/Subrosa

Tumblr | Instagram | Digits - (407) 655-6998 | Email - kyzem.leahcim@yahoo.com | Xbox - eleswun

9/4/2012 11:24 AM

i contacted bsd but im not the original owner of this hub so they wont do nothing but can you like here the wheel spinning in the dropouts?

|

[LINK TO IMAGE]">


]Refs- Dirt Nasty, RideBmxWithSWAG, FOUR, Ron44ald, TCbmx(x2), Manny5569, JMIES419, aw1234512(x2), the balt, Spikez5(x2), ecuadevil(x2), Showtime402, RiverSideRider

9/4/2012 9:30 PM
Edited Date/Time: 9/4/2012 9:31 PM

Get my text? If that doesn't work I can E-mail BSD for ya.

|

Refs: Future FBM, Warchol2 WtfKennethXp Riversiderider TCbmx Riversiderider JakeSalbert

9/4/2012 9:40 PM
Edited Date/Time: 9/4/2012 9:43 PM

I have a pretty good idea of what is wrong. Its hard to explain tho. This hub doesn't have cone nuts. The hub is just press fitted together and relies on the axle nuts/bolts to hold the hub together. I think maybe that your drop-outs aren't thick enough so the axle bolts don't create enough pressure to keep the hub together. Try putting washers on your axle bolts that will fit around the 14mm axle. The FA version of this hub is bologna. you should have gotten the male it's much more simple.

EDIT: if putting washers around the axle bolts doesn't work put them on the inside of the hub on the 14mm stubs that go in the dropouts

|