Profile "peg" bolt step not enough

Related:
Create New Tag

12/15/2020 1:57 PM

The peg bolt on the profile female bolts have a longer 14mm step on the beginning to fit pegs. Seems to be way too short. is it safe to run like this or should i drill out/change my peg?
Photo

|

bikes

12/15/2020 2:01 PM

Your playing a game of Russian roulette

|

12/15/2020 2:13 PM

That isn't tightened down all the way so it might go in another mm or two. Also, the mini was 108mm wide while the frame is 112 so there's a sizable gap, and I don't know if a hubguard will fix the issue

|

bikes

12/15/2020 2:29 PM

Tighten it down first and then post a pic.

You don’t want it to go all the way to the hub, that would prevent it from tightening down.

|




Refs : SnM An1mal, GThompson121, Chuck8273, blizzbikes, bmxsteve99, kevin.brock.338, zinum, Brian_Griffin, billyhandyjunior, riverM, tomdon
Instagram : @timhankinsbmx


12/15/2020 3:49 PM
Edited Date/Time: 12/15/2020 3:50 PM

tightened down: Photo

Around halfway through.
I was thinking taking off a tiny bit of material from the inside of the peg

|

bikes

12/15/2020 4:02 PM

Just get these and you're golden.

https://www.luxbmx.com/kink-10-14mm-axle-adapter

Obviously look for them at places around you.

|