Ratchet driver stuck

83253 ticaleb https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/83253/avatar/c50_tumblr_mnmue7VSQd1qbmjywo1_500_1409262182.jpg?1409261199 https://www.vitalbmx.com/community/ticaleb,83253/all 08/05/11 4 https://www.vitalbmx.com/community/ticaleb,83253/setup 84 1603 66 1 3

Posts: 1687

Joined: 8/5/2011

Location: Los Angeles, CA USA

5/29/2015 10:43 AM
Edited Date/Time: 5/29/2015 10:44 AM

once I pull the bolt and the collar off, I attempt to pull the driver off in the way described in the pdf I found on gsport's website. instead the driver/axle collar spacer comes off and the driver won't pull past the end of the axle and it appears to be pulling another piece up with it. I'm not sure what it is but based on the diagram I'm guessing it's the needle bearing raceway. it looks very similar to the driver/axle spacer that pulls out (from what I can see). any help would be appreciated.

| Quote

selling refs: see profile

bike check

OneGuyIlluminatiEye

108874 OneGuyIlluminatiEye https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/108874/avatar/c50_IMAG0639_1384480739.jpg?1384480607 https://www.vitalbmx.com/community/OneGuyIlluminatiEye,108874/all 11/14/13 9 https://www.vitalbmx.com/community/OneGuyIlluminatiEye,108874/setup 205 2300 10 1 4

Posts: 2505

Joined: 11/14/2013

Location: Akron, OH USA

5/29/2015 10:45 AM

Gsport ratchet hub sucks /thread

| Quote

Testimony and apologies

I want everyone to know that Jesus Christ died on the cross for all of your sins, he went to hell for three days and defeated death and rose from the grave on the 3rd day.

instagram
What would Jesus say: I didn't die for you to live like this!

old edit

ticaleb

83253 ticaleb https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/83253/avatar/c50_tumblr_mnmue7VSQd1qbmjywo1_500_1409262182.jpg?1409261199 https://www.vitalbmx.com/community/ticaleb,83253/all 08/05/11 4 https://www.vitalbmx.com/community/ticaleb,83253/setup 84 1603 66 1 3

Posts: 1687

Joined: 8/5/2011

Location: Los Angeles, CA USA

5/29/2015 10:49 AM

after taking off the bolt and collar:

after pulling on driver. the axle/driver spacer is about to come off.

after pulling off the spacer

this is as far as it goes

| Quote

selling refs: see profile

bike check

ticaleb

83253 ticaleb https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/83253/avatar/c50_tumblr_mnmue7VSQd1qbmjywo1_500_1409262182.jpg?1409261199 https://www.vitalbmx.com/community/ticaleb,83253/all 08/05/11 4 https://www.vitalbmx.com/community/ticaleb,83253/setup 84 1603 66 1 3

Posts: 1687

Joined: 8/5/2011

Location: Los Angeles, CA USA

5/29/2015 10:51 AM

OneGuyIlluminatiEye wrote:
Gsport ratchet hub sucks /thread

OneGuyIlluminatiEye wrote:
Gsport ratchet hub sucks /thread

...more

predictable and unnecessary comment. go make a thread about how you're a bigot lol

| Quote

selling refs: see profile

bike check

MaximusBikes

93006 MaximusBikes https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/93006/avatar/c50_IMG_2265_1373236816.jpg?1373236290 https://www.vitalbmx.com/community/MaximusBikes,93006/all 04/21/12 6 https://www.vitalbmx.com/community/MaximusBikes,93006/setup 244 4196 2 15 1

Posts: 4440

Joined: 4/21/2012

Location: FUCK THIS PLACE, WV USA

5/29/2015 10:52 AM

That's very strange... Maybe put a little 3 in 1 on the other side and work it back and forth. I highly doubt the axle bent, but in these situations, its possible. Maybe the bushing is a little stuck.

Just put a little oil back there and try to work it out.

| Quote

References: OneGuyIlluminatiEye, robinson79, Brian Griffin, The Horror Contact, StoreBoughtChild, C_Johnsonbmx, dkTechEthan, etc.

ticaleb

83253 ticaleb https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/83253/avatar/c50_tumblr_mnmue7VSQd1qbmjywo1_500_1409262182.jpg?1409261199 https://www.vitalbmx.com/community/ticaleb,83253/all 08/05/11 4 https://www.vitalbmx.com/community/ticaleb,83253/setup 84 1603 66 1 3

Posts: 1687

Joined: 8/5/2011

Location: Los Angeles, CA USA

5/29/2015 11:02 AM

MaximusBikes wrote:
That's very strange... Maybe put a little 3 in 1 on the other side and work it back and forth. I highly doubt the axle bent, ...more

MaximusBikes wrote:
That's very strange... Maybe put a little 3 in 1 on the other side and work it back and forth. I highly doubt the axle bent, but in these situations, its possible. Maybe the bushing is a little stuck.

Just put a little oil back there and try to work it out.

...more

I put some oil back there and used a couple flatheads to pry it out of the shell evenly. it was seized on there pretty good but I eventually got it. it's probably cus I have the aluminum axle instead of the chromo one. thanks dude.

| Quote

selling refs: see profile

bike check

MaximusBikes

93006 MaximusBikes https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/93006/avatar/c50_IMG_2265_1373236816.jpg?1373236290 https://www.vitalbmx.com/community/MaximusBikes,93006/all 04/21/12 6 https://www.vitalbmx.com/community/MaximusBikes,93006/setup 244 4196 2 15 1

Posts: 4440

Joined: 4/21/2012

Location: FUCK THIS PLACE, WV USA

5/29/2015 12:08 PM

MaximusBikes wrote:
That's very strange... Maybe put a little 3 in 1 on the other side and work it back and forth. I highly doubt the axle bent, ...more

MaximusBikes wrote:
That's very strange... Maybe put a little 3 in 1 on the other side and work it back and forth. I highly doubt the axle bent, but in these situations, its possible. Maybe the bushing is a little stuck.

Just put a little oil back there and try to work it out.

...more

ticaleb wrote:
I put some oil back there and used a couple flatheads to pry it out of the shell evenly. it was seized on there pretty good ...more

ticaleb wrote:
I put some oil back there and used a couple flatheads to pry it out of the shell evenly. it was seized on there pretty good but I eventually got it. it's probably cus I have the aluminum axle instead of the chromo one. thanks dude.

...more

No problem dude! I had the same problem with my past hubs. But that's whats good for me.

| Quote

References: OneGuyIlluminatiEye, robinson79, Brian Griffin, The Horror Contact, StoreBoughtChild, C_Johnsonbmx, dkTechEthan, etc.

Mychaylo

108502 Mychaylo https://bmx-media-bucket-photo.s3.amazonaws.com/photos/users/108502/avatar/c50_DSC00130_1406740018.jpg?1406739408 https://www.vitalbmx.com/community/Mychaylo,108502/all 10/21/13 1 7 1178 2 2

Posts: 1185

Joined: 10/21/2013

Location: GBR

5/29/2015 2:42 PM
Edited Date/Time: 5/29/2015 3:52 PM

I slightly damaged end of my aluminium axle and made pulling driver off a pain, file slightly on the edge of the axle. Should solve your problem.

Disregard that, i didnt read you fixed it but will leave my comment for someone else.

| Quote

WaldoBMX