Posts: 101
Joined: 4/18/2013
Location: Colchester, Essex, GBR
I rounded one of the 6mm allen bolst that clamps to my stem and I wanna know can anyone help? My stems a rasta 2012 Cult Salvation stem
Whatever you do, make sure you and the people you love are happy.
Whatever you do, make sure you enjoy life.
Whatever you do, make sure you never have any regrets.
Posts: 4755
Joined: 3/12/2013
Location: Hawthorne, CA USA
Happened because its rasta...
I usually get a slightly larger allen wrench and tap it in with a hammer at an angle and it works fine.
Murica bike check
REFS four, tomdon, bmx1995, jared42069, obiwan chromoly, hate breeder, nshs2010, asilva23, rascio,
Alfred NYC, Kymike, chuck8273(kind of), tc86, Ugot2dewitt, LLURider, dprc, ecuadevil, scramhype, Mario.villegas90(X2), dirtstars22, Brian_Griffin
Posts: 643
Joined: 1/29/2012
Location: Blackpool, GBR
can you get a bigger size allen key in the bolt to loosen it off if just get a size bigger hammer it in there and turn and keep pressure on the allen key while turning to minimize risk of slipping if that does not work your gonna have to drill it out and retap it
Posts: 523
Joined: 10/10/2012
Location: Fredericksburg, VA USA
Try soaking it in pb blaster, NOT wd40 and drill it from the bottom so the drill bit will turn and push the bolt out
Posts: 7769
Joined: 7/15/2013
Location: Saint Louis, MO USA
Hammer a 1/4 allen key into it. If not, drill it out, or if its hanging out enough, use vice grips or pliers to take it out
Refs : SnM An1mal, GThompson121, Chuck8273, blizzbikes, bmxsteve99, kevin.brock.338, zinum, Brian_Griffin, billyhandyjunior, riverM, tomdon
Instagram : @timhankinsbmx
