Run a gyro with an integrated headset?

Related:
Create New Tag

11/25/2016 7:56 AM
Edited Date/Time: 11/25/2016 8:01 AM

I was wondering if there was a gyro setup I could run that does not require me to get gyro tabs drilled. My frame does not have holes drilled. And my headset is integrated as well. I wrongly purchased the G3 gyro kit from odyssey and I need an alternative I also am running rear brakes that need a lower cable that splits into 2 and has the small cylinder that is placed on the calipur. If that makes sense

Thanks in advance

|

11/25/2016 9:29 AM

The only way around it is to drill the holes in your frame. But you'd want it done properly and that could cost a bit

|

11/25/2016 11:48 AM

You're basically stuck with a straight cable until you get a frame with tab holes. You simply cannot have a gyro without gyro tabs.

|

Scooter kid trying to ride a bike.
@scootereyn

11/25/2016 1:32 PM

Or get a mid school frame with a standard headset lol

|

11/25/2016 5:24 PM

Super-Pawl wrote:

Or get a mid school frame with a standard headset lol

This,I just got a 2003 mosh Lux 3 star for free. It has the option to run a gyro even though it doesn't have gyro tabs

|

11/26/2016 1:37 AM

It's not that hard to drill gyro tab holes....

|

It’s all bmx

11/26/2016 5:59 AM

adamnmexican wrote:

It's not that hard to drill gyro tab holes....

I don't know about you, but I'd want them drilled pretty accurately. No point in fucking it up and having wonky holes, still not being able to run a gyro, and destroying any re sale value of the frame

|

11/26/2016 1:24 PM

adamnmexican wrote:

It's not that hard to drill gyro tab holes....

grumpySteve wrote:

I don't know about you, but I'd want them drilled pretty accurately. No point in fucking it up and having wonky holes, still ...more

Measure twice/thrice then drill

|

It’s all bmx

11/28/2016 1:53 PM

adamnmexican wrote:

It's not that hard to drill gyro tab holes....

grumpySteve wrote:

I don't know about you, but I'd want them drilled pretty accurately. No point in fucking it up and having wonky holes, still ...more

adamnmexican wrote:

Measure twice/thrice then drill

Word. Simple solution

|

11/29/2016 8:52 AM
Edited Date/Time: 11/29/2016 8:57 AM

|

11/29/2016 8:54 AM

|

11/30/2016 9:38 AM

Thanks everyone for all the replies smile

|