Spindle HElp

Related:
Create New Tag

5/15/2010 6:31 PM

Hey i was just trading my eastern stealths for some dk socials and i was wondering how to take the spindle out i have a 8 spline and he has a 48 thanks for the help

|

5/15/2010 6:39 PM

You have to buy a 48 spline spindle if thats what your asking

|

Refs: ~Stolen Boy~, Brokenbmx(x2), Warchol2, nitrojimbo, Cjmdawg, _brendan, handlebar-to-face

5/15/2010 6:39 PM

take the cranks off then pull it out

|

5/15/2010 6:42 PM
Edited Date/Time: 5/15/2010 6:42 PM

Un-screw the spindle bolts and pinch bolts, take a crank arm off and pull out durfff

|

Refs:Wolfen-Smk-Legendsx23-Spikez5(x18)-
iridebmxeveryday-2funny4u-cokacola-bstick-
sxe411-gstring02-sunday.bmx21-irideafly(x46)-
jecbmx-mike-e-Disturbed11-ScramHype-
bdk1313-Lee_Rager-millsaps-purplerain814
-naters14-getskyhigh
And 15+ On TCU

5/15/2010 6:43 PM

take the arms off. hit the spindle with a rubber mallet

|

crystal meth

5/15/2010 6:44 PM

Harry95 wrote:

take the arms off. hit the spindle with a rubber mallet

you only need to take 1 arm off

|

Refs:Wolfen-Smk-Legendsx23-Spikez5(x18)-
iridebmxeveryday-2funny4u-cokacola-bstick-
sxe411-gstring02-sunday.bmx21-irideafly(x46)-
jecbmx-mike-e-Disturbed11-ScramHype-
bdk1313-Lee_Rager-millsaps-purplerain814
-naters14-getskyhigh
And 15+ On TCU

5/15/2010 7:47 PM

What everyone else said. I suggest a rubber mallet, plastic hammer (yes they make them) or a block of wood and a regular hammer. Just pull the spindle bolt off, pull the arm off, and slide the spindle and other arm out. Make sure your spindles are the same size before you get too far though...

|

"Hey anybody ever make that mistake like right when you wake up in the morning and you believe in yourself?" -Kyle Kinane

"BIKES!" -Tom Segura

5/15/2010 8:02 PM

dave lawrence wrote:

What everyone else said. I suggest a rubber mallet, plastic hammer (yes they make them) or a block of wood and a regular hammer. Just pull the spindle bolt off, pull the arm off, and slide the spindle and other arm out. Make sure your spindles are the same size before you get too far though...

hell ya i do that shit all the time

|

my wheel set puts your,s to shame ha ha ha !

5/16/2010 12:02 AM

8 spline would be easy to take off, just use a thick towel and a hammer. same would go with a 48 spline.

|

5/16/2010 1:45 AM

k its cool i just tapped it out with the end of a socket wrench thanks for the help thugh
/

|