Spokes

Related:
Create New Tag

6/16/2014 6:38 PM

So I want to lace a wheel and im stuck on deciding which size spoke to use. My drive side is 184.4 and my non-drive side is 183.7. Should I be fine with rounding down both spoke sizes to 184mm? I used the pijin spoke calculator and I don't want to buy the wrong size spoke. Thank you guys

|

6/16/2014 7:07 PM

Should be fine.

|

6/16/2014 7:14 PM

Fondue wrote:

Should be fine.

1234

|

I'm on the vital legit list!

6/16/2014 7:26 PM

Yeah man you will be good. You'll have to just crank the drive side half a turn extra to pull the wheel to center.

|

The first breath is the beginning of death

6/16/2014 7:50 PM

tomdon wrote:

1234

I am flabbergasted by this statement

|

6/16/2014 7:50 PM

jamiespadina wrote:

Yeah man you will be good. You'll have to just crank the drive side half a turn extra to pull the wheel to center.

thank you very much!

|

6/16/2014 7:50 PM

Fondue wrote:

Should be fine.

thanks dude smile

|

6/17/2014 7:55 AM

Yea, you can typically get away with 1-2 MM difference either way, but being as close to correct as possible.

|

"Hey anybody ever make that mistake like right when you wake up in the morning and you believe in yourself?" -Kyle Kinane

"BIKES!" -Tom Segura