Stock stamped sprockets

Related:
Create New Tag

12/19/2019 6:11 PM

Does anybody with a set or calipers or micrometers have access to a cheap stamped sprocket off of a lower end complete?

I need to figure out the thickness before I leave work tonight. A buddy has a Stolen (casino maybe?) And upgraded his crank. He doesnt have a top hat washer for the new spindle size so I'm going to zip one down on the lathe so he can continue running the stock sprocket for a while. I wont have access to a machine shop for a few weeks after tonight, so any help tonight would be appreciated!

|

12/19/2019 7:53 PM

They’re usually about 4mm, but I’m sure he can always file it down if it ends up being a bit too long. Alternatively, I’m pretty sure you can get them online for under $5

|




Refs : SnM An1mal, GThompson121, Chuck8273, blizzbikes, bmxsteve99, kevin.brock.338, zinum, Brian_Griffin, billyhandyjunior, riverM, tomdon
Instagram : @timhankinsbmx


12/19/2019 7:59 PM

HardBMX_Tim wrote:

They’re usually about 4mm, but I’m sure he can always file it down if it ends up being a bit too long. Alternatively, I’m pretty sure you can get them online for under $5

You're the man! I was running out of time so I guessed 5mm, but I'll tap it on the belt sander when I make it home. Thanks homie

|