The Pre-Interbike Wish List Thread...

i wanna see the keychain and ii wanna know when it is coming out

Wtp 2014 frames for sure, this will be the deciding factor in my new frame purchase.
Also looking forward to seeing more photos of the wtp completes
Wtp camo seat looks good too.

And like you say anything new that eclat are putting out, freecoaster, new splinedrive sprocket that's on the new envy (I think)

Anything animal have to show

And a closer look at the new gsport wheels would be nice

That's it really

I look forward to mostly just new tires and the keychain. Im actually pretty curious about the eastern one, there is supposed to be some really cool stuff happening with them. Hopefully the keychain does come out soon! i REALLY want one. Maybe a few more guarded sprockets! New types of pedals or soemthing!

I want to see more from Fiend and JJ signature frame , WeThePeople completes. Wouldn't mind Sunday/Odyssey to see what new signature part Aaron Ross will get -__- . And maybe the Premium CK complete !

The wethepeople 2014 parts and eclat parts, hopefully if they are what I like I can make a WTP and Eclat build

Georgee wrote:

The wethepeople 2014 parts and eclat parts, hopefully if they are what I like I can make a WTP and Eclat build

Georgee wrote:

The wethepeople 2014 parts and eclat parts, hopefully if they are what I like I can make a WTP and Eclat build

...more

Yes for daze. Do this!

The animal shit. If the hubs compete with my odyssey hubs I may sell them for the new animals. The new nigel seat isn't a v2 it will just come in a slim and fat.

There's supposed to actually be new forks for animal, more modern.

Heard about them, Tapered Leg, Possibly Steeper Offset? Invest Cast Drop Outs maybe? I really hope Animal have stepped up to a 4 Pawl Individually Sprung Driver! Almost the entire Team were running Mix Hubs before Animal released their Hubs! At least they should have Individually Sprung Pawls! I know they are bringing out a new 22mm Spline Drive Sprocket & I believe there is going to be an updated Vinnie too (Which also was shown as Spline Drive) I keep saying i will do an all Animal Build at some point in my BMX life! It will be Done!!

I honestly cannot wait to see whats on the horizon, I am building up my Flat Rig right now & i have a planned build which i am sure will be changed after Interbike haha, there is ALWAYS something released at Interbike i see & think.. Shit, i HAVE to have that!

SHADOW KILLERS.

Topsey wrote:

Heard about them, Tapered Leg, Possibly Steeper Offset? Invest Cast Drop Outs maybe? I really hope Animal have stepped up to a ...more

Topsey wrote:

Heard about them, Tapered Leg, Possibly Steeper Offset? Invest Cast Drop Outs maybe? I really hope Animal have stepped up to a 4 Pawl Individually Sprung Driver! Almost the entire Team were running Mix Hubs before Animal released their Hubs! At least they should have Individually Sprung Pawls! I know they are bringing out a new 22mm Spline Drive Sprocket & I believe there is going to be an updated Vinnie too (Which also was shown as Spline Drive) I keep saying i will do an all Animal Build at some point in my BMX life! It will be Done!!

I honestly cannot wait to see whats on the horizon, I am building up my Flat Rig right now & i have a planned build which i am sure will be changed after Interbike haha, there is ALWAYS something released at Interbike i see & think.. Shit, i HAVE to have that!

...more

Yeah, already saw a picture of the forks, they're tapered and what not. I want some new stuff, including a sprocket and cranks and some other stuff. Reason I've been saving almost my whole paycheck every week and not buying anything. I'm interested in seeing the new 22mm sprocket. Maybe i'll get that and the akimbos. I was gonna get a V3. When is interbike?

Damn it didn't know about the animal forks, I will just have to get them for my animal themed wtp cream for sure, hopefully the offset will be steeper tho, don't really like the ones they got out at the minute.

Would consider their hubs for my next wheelset as long as there was a compatible drive side guard cuz I'm switching to four pegs next year but at the minute I'm dead set on getting eclat hubs laced to either animal RS or gsport rims.

More decisions, just what I need!
I can never make up my mind on what parts to run. Shit stresses me out. Lol

But yeah, this is supposed to be a good year for animal, especially since last year al they dropped was a tire and pedal.

Soulrebelrastaman wrote:

Damn it didn't know about the animal forks, I will just have to get them for my animal themed wtp cream for sure, hopefully ...more

Soulrebelrastaman wrote:

Damn it didn't know about the animal forks, I will just have to get them for my animal themed wtp cream for sure, hopefully the offset will be steeper tho, don't really like the ones they got out at the minute.

Would consider their hubs for my next wheelset as long as there was a compatible drive side guard cuz I'm switching to four pegs next year but at the minute I'm dead set on getting eclat hubs laced to either animal RS or gsport rims.

More decisions, just what I need!
I can never make up my mind on what parts to run. Shit stresses me out. Lol

...more

I know dude! I really want the new hubs now. I know i'll have no problem selling my Odyssey wheels though. Now to think about it, they probably just updated the internals in the rear. I doubt the completely redesigned both hubs.

Topsey wrote:

Heard about them, Tapered Leg, Possibly Steeper Offset? Invest Cast Drop Outs maybe? I really hope Animal have stepped up to a ...more

Topsey wrote:

Heard about them, Tapered Leg, Possibly Steeper Offset? Invest Cast Drop Outs maybe? I really hope Animal have stepped up to a 4 Pawl Individually Sprung Driver! Almost the entire Team were running Mix Hubs before Animal released their Hubs! At least they should have Individually Sprung Pawls! I know they are bringing out a new 22mm Spline Drive Sprocket & I believe there is going to be an updated Vinnie too (Which also was shown as Spline Drive) I keep saying i will do an all Animal Build at some point in my BMX life! It will be Done!!

I honestly cannot wait to see whats on the horizon, I am building up my Flat Rig right now & i have a planned build which i am sure will be changed after Interbike haha, there is ALWAYS something released at Interbike i see & think.. Shit, i HAVE to have that!

...more

FreddyDapice wrote:

Yeah, already saw a picture of the forks, they're tapered and what not. I want some new stuff, including a sprocket and cranks ...more

FreddyDapice wrote:

Yeah, already saw a picture of the forks, they're tapered and what not. I want some new stuff, including a sprocket and cranks and some other stuff. Reason I've been saving almost my whole paycheck every week and not buying anything. I'm interested in seeing the new 22mm sprocket. Maybe i'll get that and the akimbos. I was gonna get a V3. When is interbike?

...more

You got a link to the picture of them forks mate?

Yeah the front hub is pretty generic like most from what I understand, still decent but yeah that rear hub needed reviewing, especially for the cost of it.

As nice as some of animal parts are, they are a little overpriced...nice packaging tho lol

Computer isn't letting me upload it. It doesn't say they are on the check, but at a later date they same somewhere else that the forks on this check are new animal proto forks that should be out for christmas. here

fiend cranks

Yeah guys the Hub Shells haven't changed at all. They are dumping the PYN Guards i believe, i know for a FACT They are dropping CRMO Guards. I am 99.9% the changes in the Rear Hub they have been hinting at are just to the engagement system. I am hoping & praying for a 4 Pawl Individually Sprung Driver. The ONLY thing stopping me getting the Wheelset for my planned Animal build is the crappy single spring/ C-Clip B.S...

Also guys (Freddy particularly i believe haha) NONE of the New Parts/Updated Parts will drop till X-mas, i have Bensons word on this.

Interbike is around the end of September, We shall have to keep our eyes peeled on the Front Page, BMX Union, RideBMX US & The Merged. Between those sites i am pretty sure we will see EVERY SINGLE BMX PRODUCT on show haha

Also, just in case anyone is interested EuroBike is just about to start. But that is more for the European/English companies. I'm sure there will still be some funky stuff on show.. Mainly for me the Autum stuff will be on show! I am watching their instagram like a hawk

Topsey, what do you mean by she- male axle? I know a female axle is where a bolt threads into a main axle to secure the whaal, but whats she male thread onto/into.

Im really looking forward to all the new Fit/Revenge and Haro stuff!

FreddyDapice wrote:

Computer isn't letting me upload it. It doesn't say they are on the check, but at a later date they same somewhere else that ...more

FreddyDapice wrote:

Computer isn't letting me upload it. It doesn't say they are on the check, but at a later date they same somewhere else that the forks on this check are new animal proto forks that should be out for christmas. here

...more

Thanx for that mate, that macniel varsity frame Is sooo nice.

I look forward to all the things we have been hearing about all year. The Keychain, the new Redline street frame, and too many things for me to think of right meow. I gotta get up for work way too early to be up right now, so it's off to sleep I go.

Im hoping for more companies to start producing 4 piece bars like FBM (probably already have some out) and S&M (the bennys don't count), I think every company should have some sort of 4 piece bar out, they feel really good and just look better and seem to be picking up in popularity

Just shows how far products go in a year... The Blind Coaster, Eclat Alloy Cranks, Key Chain, Cyclops Stem and I think the T1 Seat/Post were at Interbike last year! They need to hurry up and release these products already!

I agree it would be great to see more Tripod Seats, I really don't like Pivotal Seats. I also agree with 4 Piece Bars, they look so great and I think there needs to be more options. I also agree there should be more Tyres that aren't super fat, I like 2.1-2.2" on the Front and 1.85-1.95" on the Back. More Freecoasters would also be nice to see.

id like to get a look at those shadow cranks and guard sprocket seen a pic on fb i think it was of their sprocket and shit bricks but i also want to see everything they have to show there

I want to see solid release dates for:
The blind, keychain, cyclops stem.

Only other thing I'm really interested in is a frame with a mid bb super short cs and a wishbone that will clear a 30t dual guard mds

T1 33T Logans Run. Re-release of the cush. More CRMO sprockets.

EVERYTHING. This is the time of the year I live for, I get so excited for it haha :L