Things coming loose..

Related:
Create New Tag

8/19/2013 10:52 AM

I'm having problems with my crank/spindle coming loose. I've replaced the bearing's and tightened it all a while ago but it keeps coming loose and then making my chain come loose too. Does anyone else have this problem and also is there any way of solving/fixing this ..... thanks

|

8/19/2013 10:53 AM

I thought this thread was about my girlfriend for a second there.

|

ı̸̸̸̸̸̸̸̸̸̸̸̸̸̸̸̸̨

8/19/2013 10:55 AM

maybe you need more spacers on your cranks. tighten things down like a man

|

fack off

8/19/2013 11:00 AM

-Splines are wearing out & causing your crank arms to wiggle around & come loose
-Not enough spacers so the spindle is going too far through the arm & not being able to be tightened
-Too many spacers so the arm isn't on the spindle enough & keeps coming loose
-You don't have your internal spacer in your BB installed, this will cause your cranks to come loose
-Bolt/spindle threads are stripped

|

8/19/2013 11:00 AM

trust me i tightened things down ,but if you do it too tight the thing doesnt spin obviously. it just keeps coming loose after about 5 days riding

|

8/19/2013 11:01 AM

Thanks sundaybmxRR ,ill check it out

|

8/19/2013 11:03 AM

Really.... not even an lol? That's sad

|

ı̸̸̸̸̸̸̸̸̸̸̸̸̸̸̸̸̨

8/19/2013 11:16 AM

2 spacers on each side should be good or make sure the crank compression bolt isnt stripped

|