Ok I just got my pegs and when I tighten them it tightens my chain reall tight but when I have my pegs off my chain don't tighen real tight
|
Quote
Tightening peg problem
Posts: 325
Joined: 11/10/2014
Location: Newport, KY USA
Posts: 2520
Joined: 2/26/2012
Location: Reynoldsburg, OH USA
Posts: 25
Joined: 5/27/2013
Location: Lockport, NY USA
Not sure if troll or.. but try moving your wheel farther forward or adding a link to your chain.
|
Quote
To grind, or not to grind?
Posts: 325
Joined: 11/10/2014
Location: Newport, KY USA
Posts: 495
Joined: 8/15/2014
Location: Reynoldsburg, OH USA
|
Quote
"It's like riding someone's bike and they got the same frame" -Four
Refs:Four x4,tomdon x5,Xxohioanxx,BigCurn, Don't remember the rest
Posts: 325
Joined: 11/10/2014
Location: Newport, KY USA
Posts: 84
Joined: 8/21/2014
Location: Everett, WA USA
Your axel is slipping in your dropouts.start with your drive side, and go at it slow. Don't tighten one bolt all the way then the other, just do a little on one side then a little on the other until they are both tight. Helps if you have someone holding you're tire. Good luck.
|
Quote
Posts: 11240
Joined: 1/11/2008
Location: SOM
Posts: 325
Joined: 11/10/2014
Location: Newport, KY USA
Posts: 281
Joined: 10/21/2014
Location: Woodbridge, VA USA
a Swedish Lie wrote:Your axel is slipping in your dropouts.start with your drive side, and go at it slow. Don't tighten one bolt all the way then ...more
This^^^
|
Quote
My FBM bike check
Posts: 4965
Joined: 10/26/2010
Location: NY, USA
no no no. you wanna use a water based lube. because It evaporates after youre done put it on the chain and the cassette
|
Quote
skooter... dont be a pussy
skooter: "WHY DIDN'T YOU GIVE ME VODKA!?"
sketchytravis: "... because i like being drunk, and if i give you my vodka im not drunk as much"
Chuck8273: "Logical. I like this logic. "
Posts: 1685
Joined: 12/30/2012
Location: San Diego, CA USA
What frame are you running? Most situations like this can happen from hubguards or pegs being to big in diameter. There is the possibility the pegs are touching the welds because they are so large(peg) that when you tighten them, for it to lay flat on the dropout it pushed back. Ive had this problem on a few older frames when running dual rear hubguards.
List your frame, hub and if hubguards setup.
|
Quote
REFS-
Vital- KyMike, FEDEXdoobie, adrenalinebmx ,MaximusBikes
Bmx-forum-Tumitama, archerbiker9(2x), mrsanchezz, nguyenna, JoeyBones, fast-and-loose and many others
Also multiple sales on global-flat.com and PinkBike. Theres to many to list all. Most sales are done through texting I havent been able to keep track of who is who.
Posts: 325
Joined: 11/10/2014
Location: Newport, KY USA
The Horror Contact wrote:What frame are you running? Most situations like this can happen from hubguards or pegs being to big in diameter. There is the ...more
I got a scan r70 mongoose but yeah and a daily grind drive side hub gaurd
|
Quote
Posts: 80
Joined: 11/28/2014
Location: Henderson, KY USA
My bike does the same. When you try to tighten it the back wheel walks. For the most part it's a tighten a little here, tighten a little there until it's right. But I have no hub guards, I just use a premium products frame and stolen silencers.
|
Quote
Posts: 495
Joined: 8/15/2014
Location: Reynoldsburg, OH USA
Edited Date/Time:
Bro, the hubguard has the same resale as your bike
jk, but it is pretty close
|
Quote
"It's like riding someone's bike and they got the same frame" -Four
Refs:Four x4,tomdon x5,Xxohioanxx,BigCurn, Don't remember the rest
Posts: 325
Joined: 11/10/2014
Location: Newport, KY USA
Posts: 325
Joined: 11/10/2014
Location: Newport, KY USA
Haha kokxxy I got it cause of the frame lol I got the bike decked out but ima be getting the kink Titan frame so yeah ima make a bike check soon I'll show you it
|
Quote
Posts: 495
Joined: 8/15/2014
Location: Reynoldsburg, OH USA
Zxzbmxteam wrote:Haha kokxxy I got it cause of the frame lol I got the bike decked out but ima be getting the kink Titan frame so yeah ima make ...more
Solid frame
|
Quote
"It's like riding someone's bike and they got the same frame" -Four
Refs:Four x4,tomdon x5,Xxohioanxx,BigCurn, Don't remember the rest
Posts: 325
Joined: 11/10/2014
Location: Newport, KY USA
Posts: 495
Joined: 8/15/2014
Location: Reynoldsburg, OH USA
Edited Date/Time:
Zxzbmxteam wrote:Haha what
"ima be getting the kink Titan frame "
r u hi?
|
Quote
"It's like riding someone's bike and they got the same frame" -Four
Refs:Four x4,tomdon x5,Xxohioanxx,BigCurn, Don't remember the rest
Posts: 325
Joined: 11/10/2014
Location: Newport, KY USA
Posts: 325
Joined: 11/10/2014
Location: Newport, KY USA
Posts: 924
Joined: 6/28/2014
Location: Cornland, NE USA
Posts: 325
Joined: 11/10/2014
Location: Newport, KY USA
Posts: 80
Joined: 11/28/2014
Location: Henderson, KY USA
lmao, alright we'll go step by step through this.
Kokxxy said "Solid frame" she was referring to the Kink Titan frame you spoke about getting. You came back saying "haha what" which made the conversation seem a little awkward.
MidWestBMX said "congrats". He was being a smart ass because you just told Kokxxy that you don't like her.
|
Quote
Posts: 325
Joined: 11/10/2014
Location: Newport, KY USA
Sry guys I get confused sometimes I mean I don't know what someone means when. Somebody randomly says congrats out of no where
|
Quote
The Latest
THE SHOP
Most Popular
Terms & Conditions |
Privacy Policy |
DMCA |
Cookies |
Facebook F.A.Q.
Advertising | Contact | BMX | Mountain Bike | Motocross | BMX Bikes
Advertising | Contact | BMX | Mountain Bike | Motocross | BMX Bikes
- @cache_main: af735cbbb0e4451e90c40f77447cbdaa
