Will a cult osv3 have 28t mds clearance?

Create New Tag

8/14/2013 10:44 PM

I've heard storys about 28t and 30t not being able to fit on certain frames, im just wondering about the Cult Osv3. I know this might be a dumb question but I really wanna know.


8/14/2013 10:51 PM
Edited Date/Time: 8/14/2013 10:52 PM

should be fine. they have problems clearing frames with short cs. at 13.55 slammed on the os you should be more then fine


I'm on the vital legit list!

8/14/2013 10:57 PM

With the guard out, yes, with the guard in, not unless you use a ridiculous amount of spacers. My frame is 13.5 slammed and to get my 28T MDS to fit flipped my chain line is off by like 1/2".


8/15/2013 12:16 AM

i ran a 30 on 13chainstays, you will only have trouble if you are running a dinnerplate


8/15/2013 12:43 AM

Should clear fine. Like said above run it normal it's no worse than any other sprocket. Run it flipped or with the other guard you might have to space your chain line out abit to clear but shouldn't be too bad. I ran a 30t with the extra guard on a teirra


I'm a punk bmxer, I can't do it well so I do it loud.