axle cutting

Related:
Create New Tag

9/5/2007 3:42 PM

i am looking to cut my axles down to the bolt and was was wondering what to use and how to do it. thanks.

Post edited by: dirtjumper92, at: 9/6/2007 1:43 AM

|

9/5/2007 6:11 PM

The easiest way to do it is by using a rotary tool such as a Dremel. Use a wider cutting bit for about 3/4 of the axle, then use a thin cutting bit to finish the rest. Then use your grinding bit and grind the end smooth. During this whole procedure, try not to fuck up the axle threads.

|

REFS: trickbiker169, Dah Man, letstartariot, Hofmann Scarab

9/5/2007 6:35 PM

3PieceWillie wrote:

The easiest way to do it is by using a rotary tool such as a Dremel. Use a wider cutting bit for about 3/4 of the axle, then use a thin cutting bit to finish the rest. Then use your grinding bit and grind the end smooth. During this whole procedure, try not to fuck up the axle threads.

i used a hacksaw on my front wheel, left the back alone

|