danscomp product info question

okay campy spec is 45/45 degree and the standard integrated is something else. most new headsets should work 45/45 check the description on your headset but should work alright anyway if you don't have 45/45

jamiespadina wrote:

okay campy spec is 45/45 degree and the standard integrated is something else. most new headsets should work 45/45 check the ...more

jamiespadina wrote:

okay campy spec is 45/45 degree and the standard integrated is something else. most new headsets should work 45/45 check the description on your headset but should work alright anyway if you don't have 45/45

...more

well mine is a loose ball headset which is this one http://www.danscomp.com/301054.php

and the race that comes with it, i was thinking to lay it over the integrated one (non campy)

Get a mechanik headset They will work with a fork that has a int race built in.Fudging headsets will work.......for a short time.Then destroy it's self.

bloghogs wrote:

Get a mechanik headset They will work with a fork that has a int race built in.Fudging headsets will work.......for a short ...more

bloghogs wrote:

Get a mechanik headset They will work with a fork that has a int race built in.Fudging headsets will work.......for a short time.Then destroy it's self.

...more

they do not have it anymore

Campy standard (45/45) IS the 'standard'. A couple of frames used 36/45 but it was the minority and I doubt anyone does it anymore

Not a good idea to run looseball headset with integrated-race forks

jawn wrote:

Campy standard (45/45) IS the 'standard'. A couple of frames used 36/45 but it was the minority and I doubt anyone does it ...more

jawn wrote:

Campy standard (45/45) IS the 'standard'. A couple of frames used 36/45 but it was the minority and I doubt anyone does it anymore

Not a good idea to run looseball headset with integrated-race forks

...more

okay but what if i put on the separate bearing race that came with my headset over the integrated race

That's also a bad idea. It will be the very edge of a 90° corner pressed against a 45° ramp. Such a small surface area will not be able to bear the load it needs to

I would either get the headset I mentioned,or get a fork that doesnt have a built in integrated race.(if there are any anymore)

bloghogs wrote:

I would either get the headset I mentioned,or get a fork that doesnt have a built in integrated race.(if there are any ...more

bloghogs wrote:

I would either get the headset I mentioned,or get a fork that doesnt have a built in integrated race.(if there are any anymore)

...more

well the fit blades have that option

Odyssey Dirts may still have the option too

jawn wrote:

Odyssey Dirts may still have the option too

jawn wrote:

Odyssey Dirts may still have the option too

...more

dont they come with 14mm dropouts, or not anymore?

Order from empire instead. Shoot them an email and they will tell you what will work