female axel and peg worries

Related:
Create New Tag

10/9/2014 6:58 PM

I used to run a straiggt male axel up front I was still bending it on my peg side.

I am sure you guys have female and pegs. Is it alright? Is it strong enought?

|

10/9/2014 7:15 PM

Female is stronger than male, so yes.

|

10/9/2014 7:21 PM

It's stronger

|

refs: hookjrclc, hardbmxtim, hatchmoses for sale and trade, kymike for sale and trade, blizzbikes for trade, and some other dude i cant remember his username, vrsapat956, colonydirt94, mario.villegas90, wolfen
Camera Setup: Panasonic HMC150, Panasonic GH2, Canon FTBn, Yashica Lynx 5000e, Canon 28mm f/2.8, Canon 50mm f1.4, Rokinon 7.5mm f/3.5

10/9/2014 7:26 PM

Never had any issue with 3/8ths female axles in the front. for a short time i had 3/8ths female in the rear it sucked, i went through two bolts in a matter of a few months.

|

Blair & Jasmin | Stella | Roxanna | Arianna v2 | Instagram: @Blakeyardigan

Ref's- TCbmx, Eatmybutt, Tito24, Trentydoo, Night Light, Ninjacat33, fly for life, Showtime402, \BMX-1995/, Pavmio, Bmx-Junkie, Dream, Ticaleb, Ricked_Em

10/10/2014 3:53 AM

How is it stronger? I remenber bending the shit out oglf my tree bolts

|

10/10/2014 4:58 AM

funfrontbrake wrote:

How is it stronger? I remenber bending the shit out oglf my tree bolts

This is how it works...

Try snapping a pencil in half (male axle), pretty simple right? Now try and snap one of those halfs (female axle), it's gona take a lot more effort to do so aye.

|

You don't have to be great to start, but you have to start, to be great...

10/10/2014 7:22 AM

|




Refs : SnM An1mal, GThompson121, Chuck8273, blizzbikes, bmxsteve99, kevin.brock.338, zinum, Brian_Griffin, billyhandyjunior, riverM, tomdon
Instagram : @timhankinsbmx


10/10/2014 9:24 AM

I run g-sport hubs 3/8 bolts in aluminium axles, trust them on anything.

|

10/10/2014 9:39 AM

It was the very first v. in 2006 i think.
I was just septical! thanks guys

|

10/10/2014 10:01 AM

I've been wondering the same thing honestly because I've been thinking about picking up some female hubs, but I'm so hard on the front when I grind. I'm still running a 14mm hollow male, a little on the heavy side but I trust it more as I've always destroyed 3/8th's axles within a day.

|

10/10/2014 1:03 PM
Edited Date/Time: 10/18/2014 8:50 PM

3/8 rear female is crap though, 14mm rear all day
True 14mm female is the best case scenario, but khe designed coasters can't use them for durability reasons sad

|

refs: hookjrclc, hardbmxtim, hatchmoses for sale and trade, kymike for sale and trade, blizzbikes for trade, and some other dude i cant remember his username, vrsapat956, colonydirt94, mario.villegas90, wolfen
Camera Setup: Panasonic HMC150, Panasonic GH2, Canon FTBn, Yashica Lynx 5000e, Canon 28mm f/2.8, Canon 50mm f1.4, Rokinon 7.5mm f/3.5

10/10/2014 3:42 PM

10mm female in the front
14mm male in the back

Nuff said.

|

Freestyle is the answer to everything --
a fresh way to approach a dull or a
dangerous thing.
to do a dull thing with style
is preferable to doing a dangerous thing
without it.

Os 94
Ms 01
Ns 12


10/10/2014 4:17 PM

Soulrebelrastaman wrote:

10mm female in the front
14mm male in the back

Nuff said.

10mm female in the front.
14mm female in the back.

Nuff said.

|

10/11/2014 1:02 AM

bmxsteve99 wrote:

3/8 rear female is crap though, 14mm rear all day
True 14mm female is the best case scenario, but khe designed coasters can't ...more

I run 3/8 female and its no that bad form me honestly. I dont usually grind tho.

|

RIDE OR DIE



THE ROUTER

Instagram: Luislorentebmx