freecoaster help!?!

Related:
Create New Tag

5/5/2011 8:23 PM

For some reason when i stop pedaling my freecoaster engages by itself, does anyone know why and how to fix it?

|

5/5/2011 8:25 PM

which hub do you have?

|

twitter

PROBZ

5/5/2011 8:26 PM

Maybe your grease is all dirty and your clutch is sticking.
Take it apart, clean it, inspect everything, grease it, and put it back together.

|

5/5/2011 8:29 PM

BJ Tomczik wrote:

which hub do you have?

Federal im pretty sure its the v1 and ill try to grease it and see if it works

|

5/5/2011 9:39 PM

BJ Tomczik wrote:

which hub do you have?

sarasotabmx16 wrote:

Federal im pretty sure its the v1 and ill try to grease it and see if it works

good call, that's what i was going to say but he beat me to it

|

twitter

PROBZ

5/6/2011 4:28 PM

It didnt work its still engaging by itself

|

5/6/2011 5:14 PM

A. did you clean it and remove ALL old grease?
B. did you inspect EVERYTHING?

|

5/6/2011 7:53 PM

LorenzoGallegos wrote:

A. did you clean it and remove ALL old grease?
B. did you inspect EVERYTHING?

I bet you he just popped the driver out.

|

trails are not skateparks, they exist solely from the work and dedication of local riders. so next time you start complaining about not having local trails to ride, you only need look at yourself.
Bike check?

5/6/2011 9:38 PM

LorenzoGallegos wrote:

A. did you clean it and remove ALL old grease?
B. did you inspect EVERYTHING?

cupovjoe wrote:

I bet you he just popped the driver out.

I said the exact same thing.

|

My nigga Ressler, stay up!
My nigga Babysatan, stay up!
My nigga Copiolet, stay up!
My nigga DakAttack, stay up!
My nigga NCDave, stay up!
My nigga Enzo, stay up!


And I ride for my niggas

5/6/2011 9:56 PM

LorenzoGallegos wrote:

A. did you clean it and remove ALL old grease?
B. did you inspect EVERYTHING?

cupovjoe wrote:

I bet you he just popped the driver out.

JustRideBMX wrote:

I said the exact same thing.

people think thats all you have to do to take care of a coaster and im like, no. this isn't some sissy boy cassette device.

|

trails are not skateparks, they exist solely from the work and dedication of local riders. so next time you start complaining about not having local trails to ride, you only need look at yourself.
Bike check?

5/6/2011 10:39 PM

cupovjoe wrote:

I bet you he just popped the driver out.

JustRideBMX wrote:

I said the exact same thing.

cupovjoe wrote:

people think thats all you have to do to take care of a coaster and im like, no. this isn't some sissy boy cassette device.

Hey, leave me and my hub noise alone!

|

5/11/2011 6:32 AM

No i took everything apart i took the axle and bearings out too and i cleaned it and regreased it, but i found that one off the ball springs were grinded half way down so the person i bought it from messed it up

|