help

Related:
Create New Tag

10/9/2011 12:45 PM

any ideas on how to get this bar end out?
Photo

|

"run the wall"
EAST COAST REPPIN!
610BRICKSQUAD

10/9/2011 12:46 PM

Blow into the other end.

|

10/9/2011 12:49 PM

Booshy wrote:

Blow into the other end.

i dont have anything to blow in there with

|

"run the wall"
EAST COAST REPPIN!
610BRICKSQUAD

10/9/2011 12:51 PM

Booshy wrote:

Blow into the other end.

mastershake wrote:

i dont have anything to blow in there with

You don't have a mouth? I'm sorry to hear that.

Haha I was joking, try use a corkscrew. If that doesn't work just hammer it in to your bars enough so you can fit another barend in.

|

10/9/2011 12:53 PM

Yeah a corkscrew will do the trick. I've used them several times to remove bar ends.

|

10/9/2011 12:54 PM

i once manage to completely break it and now a barend in my bars near the bend

|

10/9/2011 12:59 PM

Booshy wrote:

Blow into the other end.

mastershake wrote:

i dont have anything to blow in there with

Booshy wrote:

You don't have a mouth? I'm sorry to hear that.

Haha I was joking, try use a corkscrew. If that doesn't work just hammer it in to your bars enough so you can fit another barend in.

i just might have to hammer it in because its a hollow bar end

|

"run the wall"
EAST COAST REPPIN!
610BRICKSQUAD

10/9/2011 1:00 PM

mastershake wrote:

i dont have anything to blow in there with

Booshy wrote:

You don't have a mouth? I'm sorry to hear that.

Haha I was joking, try use a corkscrew. If that doesn't work just hammer it in to your bars enough so you can fit another barend in.

mastershake wrote:

i just might have to hammer it in because its a hollow bar end

Could try hook something into the end and pull it out? That kinda makes easier than getting out a solid one.

|

10/9/2011 1:10 PM

Booshy wrote:

You don't have a mouth? I'm sorry to hear that.

Haha I was joking, try use a corkscrew. If that doesn't work just hammer it in to your bars enough so you can fit another barend in.

mastershake wrote:

i just might have to hammer it in because its a hollow bar end

Booshy wrote:

Could try hook something into the end and pull it out? That kinda makes easier than getting out a solid one.

i just did that and got it out i used a wire hanger hammered the hook part down stuck it in there and hooked on the bar end and pulled it out

|

"run the wall"
EAST COAST REPPIN!
610BRICKSQUAD

10/9/2011 1:11 PM

mastershake wrote:

i just did that and got it out i used a wire hanger hammered the hook part down stuck it in there and hooked on the bar end and pulled it out

I actually helped someone, wtf.

|

10/9/2011 4:12 PM

burn that pos

|

me
setup

nollie tailwhips
nose manual
nollie 540 cab try it its fun