instead of grip glue

what?

hair spray with a screw diver dont cut your grip open





get chechup with a a paper towl and wipe it on it it will work

what can i use to grip my grips to my bars instead of grip glue because i dont have any?

nothing, just slide them on without anything on them. you gotta twist and push a lot put mine never move

those eastern grip locks. 2 brakes, keep it tight.

hairspray or just take it off wipe it completely clean then put a very very tiny bit of water so it can slip on then spin them a little n leave it for a lil while theyll dry on

sharifzadeh wrote:

hair spray with a screw diver dont cut your grip open





get chechup with a a paper towl and wipe it on it it will work

tryed it
wait over night for some reason it made it worse

just put a little spit in them and slide them on. wait about fifteen minutes and they'll be good

alcohol, but not drink alcohol lol, the one to desinfect stuff

when it evaporates your grips will not move at all

If u have an air gun attatchment for yo air compressor use that when u have a quarter of tv grip on put the nozzle in the end and pull the trigger it will make the grip bigger so it can go on and when u take the nozzle out it will go small again mine never move

use some zip ties, put em underneath the grips, like a bunch. and let the plastic of the zip ties slide on to the bars, seems weird but it works. try google it on ride bmx web page, it was on there.

spray paint also works. spray it on, slip the grips in. then let dry.

sharifzadeh wrote:

hair spray with a screw diver dont cut your grip open





get chechup with a a paper towl and wipe it on it it will work

adammm wrote:

tryed it
wait over night for some reason it made it worse

Did it freeze overnight? Try taking grips off, drink a can of mountain dew or coke, then spit in the grip, let the spit dribble thru the whole grip, and then slide it on... The spit will lubricate it enough to get it on there, but the Dew will make it sticky, and when it dries, it will hold on pretty well.

i have used spray paint and it works pretty well
and also the air trick works good.

i do this on my quad when i put grips on and they dont come off so its bound to work on a bike lol

hair spray, or soap, or spit and a little bit of elbow grease are my favorites

use baby oil to get your grips on and off, and once that stuff dries all the way your grips never move, ive been usuing it for years

wax and grease remover thats realys good i used it they slid on very quikly but it drys so quick ya got to get them on with in like 10 secs but get them on and its very hard to get them off! and if ya use that it cleans the bars and grips of any oil so they go on and stay on!

^^^^^ best way to grips on ever is the zip tie trick no throtle and no waiting for hairspray or lube to dry its soo fast and eazy!

2funny4u wrote:

use baby oil to get your grips on and off, and once that stuff dries all the way your grips never move, ive been usuing it for years

lol

use wd-40 spray enough for grip to slip on and wait like 5 mins. and bam...thats wat i do.

ive never had a grip slip. just but anything on the bars and inside of the grip and slide the grip on. wait 10 minutes and ride.

if you get new grips, just use an air compressor with a needle(like when use to fill a basketball) and push the air betwwen the grips and the bars. once on, they wont move as long as your bars are clean under the grips.

Hairspray works well.

umm just boil some water stick your grips in the boiling water take em out after like 10 min they should feel soft stick em on your bars lock down on them with your hands in your normal riding position they should kind of form like ure hands and stick on your bars or just get wd-40 spray the grips while their on the bars light em after the flame goes off grip onto them like normal ridiing position with gloves so you dont get burnt if their hot those 2 should do the trick

hairspray or boiling then putting it on

air compressor