Problem solved

Create New Tag

1/20/2018 1:14 PM

Ok so don’t make fun of me but I got a new fork and couldn’t get it on then got mad, took the top part of the stem off then put it on the fork a little bit the slammed it into the ground until it was on. I got it on but now I need it off to put it on the bike. Any ideas?Photo


1/20/2018 1:18 PM

Screwdriver in between the slot. Twist it to help spread the stem while using a rubber mallet on the underside


1/20/2018 1:27 PM

Put the bars on and twist. Lol!


1/20/2018 1:28 PM
Edited Date/Time: 1/20/2018 1:32 PM

Step 1: cry
Step 2: put penetrating oil the stem/forks and let it sit
Step 3: put the stem in a vise forks facing up (maybe put something in between so you don't scratch the paint too badly
Step 4: twist the forks while pulling them upwards.
Step 5: wipe off any oil left over
That might work..
I've never tried it but it's just an idea no hate if it's a dumb one


Follow me on instagram @69instagreg