my usual paint stripper is not stripping my bars

Related:
Create New Tag

4/23/2013 8:39 PM

Any strippers you stand by 100%?

|

Refs:
ac~handley -les.cheek - the_bmxist -Skids007(x4) - Roqfan - jared42069 - Bmxnick2511

4/23/2013 8:51 PM

None.
Except sandpaper.
Everything ive tried to strip doesnt work & im not buying the 24hr shit.

|

Instagram

Refs:tomdon x4,Xxohioanxx,BigCurn, Don't remember the rest

4/23/2013 9:30 PM

It doesn't work because I think bars are powder coated and the stripper only works on paint, i just use sandpaper

|

Murica bike check
REFS four, tomdon, bmx1995, jared42069, obiwan chromoly, hate breeder, nshs2010, asilva23, rascio,
Alfred NYC, Kymike, chuck8273(kind of), tc86, Ugot2dewitt, LLURider, dprc, ecuadevil, scramhype, Mario.villegas90(X2), dirtstars22, Brian_Griffin

4/24/2013 5:16 AM

I use paint stripper only to remove the paint on the welds, I usually sand everything down with sand paper.

|

"Are they punkin' me Tio, are they punkin' me?"

4/24/2013 6:47 AM

Aircraft paint stripper. it just takes several coats, and alot of time to get throught factory paint

|

Refs:
Bought from: Tito24, tinybikerider33 (x2), RideBikesYoo, hookjrclc, MrHavoc1988, ScramHype, BigOleMonster
Sold to: Jared42069 (x2), Sancheezz, blueep3piece, Marco_Gonzalez, Riverside Rider, HardBMX_Tim
Traded: tomdon
Hooked me up: zachhendrix, oscar7588

Personal Email: snmloverbmx@hotmail.com
n-dür product info/ order email: ndur_bmx@outlook.com
n-dür on facebook

4/24/2013 6:49 AM

i used this stuff called like "dads paint stripper" it was like a liquid/gel that you poured into a windex bottle and sprayed it (only worked when sprayed , when it was sprayed it turned into a foam/gell) and that shit worked amazing

|

4/24/2013 11:56 AM

Most of the time you need to scuff paint or powdercoat with like an 80grit sandpaper and then apply the aircraft stripper in a heavy coat,by scuffing it you open up the paint and allow the stripper to get under the paint and work ALOT better.

|

4/24/2013 3:33 PM

When I painted my bars I just sanded them down to mostly raw with 220 grit, took forever, I recommend using lower than that, but it came out fantastic, I don't believe paint stripper is necessary.

check out the bars http://www.vitalbmx.com/forums/General-BMX-Talk,2/Spray-painted-handlebars,1281491

|