Posts: 18
Joined: 5/3/2008
Location: Valencia, ESP
Edited Date/Time:
ok I got this problem... my peg kinda unscrews off, when I grind.
I've tightened it about 5 times now, but once I grind it unscrews again.
what can I do?
is it the screw, the peg?
My treehouse is made from skateboards...
Ü
Posts: 756
Joined: 3/23/2008
Location: Oconomowoc, WI USA
Posts: 68
Joined: 6/12/2008
Location: Pekin, IL USA
lock tite will make it really hard to get off.. but very good idea unless you get flats alot. just get a four pronged socket wrench like the ones that you would use for a lug nut on a vehicle and torque the hell out of it... thats what i do... just tighten the hell out of it...
"THE ONLY FAILURE IN LIFE, IS THE FAILURE TO GET BACK UP" EVIL KNIEVAL
Posts: 31
Joined: 3/10/2008
Location: Los Angeles, CA USA
they used to make pegs with those spyder mounts, and i think they still sell pegs with little pins that fit in your dropout and keep them from spining.
just get some of those.
the few bucks are worth it when the other option is loosing a sesh to a loose wheel or overtightening your wheel and making it spin bad
Posts: 68
Joined: 6/12/2008
Location: Pekin, IL USA
yea.. i know for sure that hte oddysey jpegs have those and the shadow little ones do..im going to get hte little ones...
"THE ONLY FAILURE IN LIFE, IS THE FAILURE TO GET BACK UP" EVIL KNIEVAL
Posts: 291
Joined: 4/24/2008
Location: Boulder City, NV USA
There called anti-spin pegs.
get em
grind em
love em
(\__/)
(=-.-=)
(")_(")
Blazed bunny.
this bunny had a little to much kush.
Posts: 191
Joined: 5/5/2008
Location: Brampton, USA
Posts: 291
Joined: 4/24/2008
Location: Boulder City, NV USA
just do what i said lol
(\__/)
(=-.-=)
(")_(")
Blazed bunny.
this bunny had a little to much kush.
Posts: 756
Joined: 3/23/2008
Location: Oconomowoc, WI USA
Posts: 291
Joined: 4/24/2008
Location: Boulder City, NV USA
yeah, remember
al good pegs are anti spin
(\__/)
(=-.-=)
(")_(")
Blazed bunny.
this bunny had a little to much kush.
Posts: 756
Joined: 3/23/2008
Location: Oconomowoc, WI USA
Posts: 1302
Joined: 10/16/2007
Location: Curico, CHL
i drilled a few holes on my pegs and build up some home made anti-spin pins..
really easy and a lot cheaper than buying new pegs
Posts: 592
Joined: 3/27/2008
Location: Duluth, GA USA
Posts: 18
Joined: 5/3/2008
Location: Valencia, ESP
