someone help me

Related:
Create New Tag

5/4/2011 9:04 AM

ok so im wanting to run a gyro i have no idea what i need to do this i was told the old gyros that came on basicly all stock bikes wont work i have a sunday forcaster idk if that matters but can someone make up a list and maybe links of what i need to get i dont want to pay a million dollars for brakes lol i want something cheap that will work and last

|

bike check http://www.vitalbmx.com/forums/Bike-Checks,27/ONE-TOUGHT-PODRE,1235558

[LINK TO IMAGE]

refs: fitbikeco77, iridebmxeveryday, nickkkk, floka myers, tinybikerider33, bmxihb321, beastassdick, lee rager

5/4/2011 9:49 AM

sst gyros are cheap and odessey gtxs arent too exspencive

|

ride it like you stole it

5/4/2011 9:51 AM

get the complete odyssey gyro setup there pretty cheap and they work real nice you just have to find a lever and calipers and maby gyro tabs but it comes with eveything else

|

5/4/2011 10:02 AM

i was told by dane wild that it wont fit on my frame without moding it

|

bike check http://www.vitalbmx.com/forums/Bike-Checks,27/ONE-TOUGHT-PODRE,1235558

[LINK TO IMAGE]

refs: fitbikeco77, iridebmxeveryday, nickkkk, floka myers, tinybikerider33, bmxihb321, beastassdick, lee rager

5/4/2011 10:06 AM

he was getting back at u for calling him a bitch probably!.......

|

I have nothing against pegs at all, I don’t think you’re dumb if you ride pegs, I don’t care about your pegs, they are just pegs! What I do hate is the fact that every person in BMX hops on this bandwagon of three pegs, and beanies, and weed, and hop-over grinds… It’s just sad that the pros who influence kids are more worried about looking cool than the kids themselves! It’s crazy!-Trey Jones

5/4/2011 10:07 AM

Important question.Is your frame drilled for tabs?

|

Mostly peaceful posting on vital.

5/4/2011 10:09 AM

if its not drilled then its a waste of your time to try for a gyro

|

5/4/2011 10:11 AM

yes its drilled i said its the forcaster all the forcasters come drilled

|

bike check http://www.vitalbmx.com/forums/Bike-Checks,27/ONE-TOUGHT-PODRE,1235558

[LINK TO IMAGE]

refs: fitbikeco77, iridebmxeveryday, nickkkk, floka myers, tinybikerider33, bmxihb321, beastassdick, lee rager

5/4/2011 10:12 AM

then get the tabs and your set you shouldnt have to mod anythng

|

5/4/2011 10:14 AM

Devon_Fincher wrote:

then get the tabs and your set you shouldnt have to mod anythng

alright sweet im gonna go see if it fits

|

bike check http://www.vitalbmx.com/forums/Bike-Checks,27/ONE-TOUGHT-PODRE,1235558

[LINK TO IMAGE]

refs: fitbikeco77, iridebmxeveryday, nickkkk, floka myers, tinybikerider33, bmxihb321, beastassdick, lee rager

5/4/2011 10:22 AM

Devon_Fincher wrote:

then get the tabs and your set you shouldnt have to mod anythng

jbeaton13 wrote:

alright sweet im gonna go see if it fits

good luck its a good bit of work getting them adjusted but its worth it

|

5/4/2011 11:50 AM

yea the gyro dont fit around the frame where it flares out for the headset

|

bike check http://www.vitalbmx.com/forums/Bike-Checks,27/ONE-TOUGHT-PODRE,1235558

[LINK TO IMAGE]

refs: fitbikeco77, iridebmxeveryday, nickkkk, floka myers, tinybikerider33, bmxihb321, beastassdick, lee rager

5/4/2011 12:20 PM

the actuall detangler? which one are you using

|

5/4/2011 12:26 PM

its pretty hard to find a gyro setup that Doesn't need modding to work nowdays. you might have to shave something or buy another brand detangler

|

trails are not skateparks, they exist solely from the work and dedication of local riders. so next time you start complaining about not having local trails to ride, you only need look at yourself.
Bike check?

5/4/2011 1:01 PM

Devon_Fincher wrote:

the actuall detangler? which one are you using

yea and its just one that i had laying around from an old stock bike like the odyssey 3 gyro you can get at albes

cupofjoe: is that safe to have to shave it out cuz it is real tight and dane wild told me to get the snafu detangler

|

bike check http://www.vitalbmx.com/forums/Bike-Checks,27/ONE-TOUGHT-PODRE,1235558

[LINK TO IMAGE]

refs: fitbikeco77, iridebmxeveryday, nickkkk, floka myers, tinybikerider33, bmxihb321, beastassdick, lee rager

5/4/2011 1:22 PM

We used to take a dremel tool to the inside of the gyro back when we ran Chris King Headsets. That and we bent the bottom tabs on the gyro out,

|

5/4/2011 10:48 PM

Devon_Fincher wrote:

the actuall detangler? which one are you using

jbeaton13 wrote:

yea and its just one that i had laying around from an old stock bike like the odyssey 3 gyro you can get at albes

cupofjoe: is that safe to have to shave it out cuz it is real tight and dane wild told me to get the snafu detangler

you can actually grind out quite a bit as long as you dont start cutting into the bearing races

|

5/5/2011 8:41 AM

Devon_Fincher wrote:

you can actually grind out quite a bit as long as you dont start cutting into the bearing races

ok cool what should i use to do that

|

bike check http://www.vitalbmx.com/forums/Bike-Checks,27/ONE-TOUGHT-PODRE,1235558

[LINK TO IMAGE]

refs: fitbikeco77, iridebmxeveryday, nickkkk, floka myers, tinybikerider33, bmxihb321, beastassdick, lee rager