Posts: 144
Joined: 10/5/2008
Location: Pittsfield, MA USA
Edited Date/Time:
the bolts in my stem snapped but the screw is skinny so my stock bolts are to fat for it what do to do bc idk what size the bolt is
and whhat are good bolts that will fit it bc the bolts have a small bodhy
Posts: 7328
Joined: 6/11/2008
Location: Hicktown, AL USA
Posts: 3246
Joined: 10/19/2008
Location: Eastlake, OH USA
^^^^^^^^^^^^^^^RIght^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
I <3 theamazingjack, dan, ressler, and dakota
Posts: 25841
Joined: 8/10/2008
Location: Radtown, VA USA
yay
My nigga Ressler, stay up!
My nigga Babysatan, stay up!
My nigga Copiolet, stay up!
My nigga DakAttack, stay up!
My nigga NCDave, stay up!
My nigga Enzo, stay up!
And I ride for my niggas
Posts: 1551
Joined: 4/21/2009
Location: Roanoke, VA USA
Posts: 144
Joined: 10/5/2008
Location: Pittsfield, MA USA
Posts: 144
Joined: 10/5/2008
Location: Pittsfield, MA USA
Posts: 2788
Joined: 7/14/2008
Location: Spearville, KS USA
take it to your local shop, they can drill out the old bolts and put new ones in. but if the yare going to charge an arm and leg, get a new stem. and lay off the roids.
(\__/)
(='.'=)
( .Y. )
(")v(")
09 Kink Transition...yes...i ride a tranny.
Im the CLIT commander of the sexy army.
Posts: 7528
Joined: 2/21/2008
Location: The Mo, CA USA
nirvestreetrider wrote:
take it to your local shop, they can drill out the old bolts and put new ones in. but if the yare going to charge an arm and leg, get a new stem. and lay off the roids.
come to cali
My refs ?... Nigga just ask about me
Posts: 1551
Joined: 4/21/2009
Location: Roanoke, VA USA
they'll drill out the old bolt part then they will re tap the hole
try to take it to a machine shop
or call up eastern too
+1
