strong bmx pedals( always bend axles)

Primo Super Tenderizer for aluminum pedals (or magnesium) but i've beat the shit out of my Odyssey Twisted PC pedals and haven't bent one yet...i also use them on my DJ and i used to do a lot of roof drops and ledge drops with them that were probably 15 feet of the ground.

odyssey JCPC lifetime warranty on the spindle

i bent my spindle on my odysseys :/

sparling wrote:

i bent my spindle on my odysseys :/

On the JCPCs?

i'd say JCPC's too, they're great

sparling wrote:

i bent my spindle on my odysseys :/

Xxohioanxx wrote:

On the JCPCs?

trailmix

sparling wrote:

i bent my spindle on my odysseys :/

how much do you weigh??

sparling wrote:

i bent my spindle on my odysseys :/

sbc785 wrote:

how much do you weigh??

165

i weigh 35 lbs more than you, i ride hard as hell and i still haven't bent an Ody spindle, what the hell were you doing to bend one?

Never heard of anyone bending pedal axles before.. Scary.. :O

I've never heard of much people bending their pedal axles.. Scary.. :O

Crazy you're bending pedal axels before braking you crank bosses. I've always known DK distortion pedals to be a super tough metal pedal, primo tenderizers too.

eastern pedal- street gap
duo pedal- jumped off a roof
eclat pedal- 360 over a big pilon
animal pedal- regular riding
odyssey pedal- landing low on a hip
demolition x2- regular riding
1664- landing heavy

you've bent more pedal spindles in 1 post then i have in 15 years of riding...

shadow ravager pedals are pretty tuff had them for awhile (pins got flat thou :/ )

just make ones out of cardboard

Pretty sure most pedals have a pretty standard chromo axle so they should all be about the same

my stolen thermalite sp pedals are strong as hell, light, large platform, and excellent grip

are your pedals not tightened all the way when they bend giving more leverage? I guess i can see them bending, but not that many becuase its exceptionally hard to bend them seeing as the platform of the pedal runs completely down the spindle. The only thing i can think of is running sealed pedals since there is less slak as unsealed

BmxNinja101 wrote:

my stolen thermalite sp pedals are strong as hell, light, large platform, and excellent grip

I have some too and loved them at first but if you barely scrape them on a ledge you're loosing a pin. That's the only thing I hate about them. Could use just a touch more concave too.

JCPCs. Never look back.

danbmxer wrote:

are your pedals not tightened all the way when they bend giving more leverage? I guess i can see them bending, but not that many becuase its exceptionally hard to bend them seeing as the platform of the pedal runs completely down the spindle. The only thing i can think of is running sealed pedals since there is less slak as unsealed

actually most pedals only have spindles that go 1/2 of the way to 3/4 which gives it less leverage to bend one...

JCPCs are probably your best bet. Probably one of the strongest, if not the strongest pedals you can buy right now.

danbmxer wrote:

are your pedals not tightened all the way when they bend giving more leverage? I guess i can see them bending, but not that many becuase its exceptionally hard to bend them seeing as the platform of the pedal runs completely down the spindle. The only thing i can think of is running sealed pedals since there is less slak as unsealed

sbc785 wrote:

actually most pedals only have spindles that go 1/2 of the way to 3/4 which gives it less leverage to bend one...

What the fuck are you on about?

JC/PCs as mentioned if you should ever damage the spindle Odyssey will warranty it & the bodies are cheap to replace if you should grind through them. If they arent your thing there are a couple of pedals coming out with a similar design spindle., Kink & Animal to be precise.

mrjimyjohn wrote:

What the fuck are you on about?

i'm just bustin his balls and arguing for no reason since he wants to be all up in my business and shit...

Ask Sean Burns. I seen him in person yesterday so I'm sorry this thread was a day late....

proof he was in my town. this pic was taken a couple days before the event. but he was at the event along with Stevie Churchill and Hamilton. There may have been other pros there too it was cool. New England Jam Chowda

danbmxer wrote:

are your pedals not tightened all the way when they bend giving more leverage? I guess i can see them bending, but not that many becuase its exceptionally hard to bend them seeing as the platform of the pedal runs completely down the spindle. The only thing i can think of is running sealed pedals since there is less slak as unsealed

I tighten my pedals down as hard as I can. ( I even stand and hop sometimes to get them tighter) and use blue locktite on it. so that cant be the problem