Posts: 298
Joined: 9/30/2009
Location: Claremont, CA USA
does any one know how to take out the bearings in a odyssey vandero 2 front hub my bearings are blown and i need to put new ones in but idk how to take them out and i cant find shit on google on how to do it nor could i find a online instruction manual for my hub either and i dont have money for a jew ass bike shop to do it for me
Posts: 17483
Joined: 1/17/2009
Location: Kingston, NY USA
If you didn't take it apart how do you know they were blown?
Bikes. Cameras. Cars. Beer. NYx845
Posts: 2746
Joined: 7/22/2009
Location: vladigar, ASM
take the locknuts off and the dust covers than ohh its female nvm i dont know
ref(s): evenwest94
Posts: 17483
Joined: 1/17/2009
Location: Kingston, NY USA
kinkyfit7777 wrote:take the locknuts off and the dust covers than ohh its female nvm i dont know
Then why'd you post?
Anyways it should be the same as most hubs. Take out everything till you get the bearins. It's really simple, just lay the pieces you take out in order so everything goes back together nice and smooth
Bikes. Cameras. Cars. Beer. NYx845
Posts: 298
Joined: 9/30/2009
Location: Claremont, CA USA
Edited Date/Time:
Ressler711 wrote:If you didn't take it apart how do you know they were blown?
cuz i can hear it making weird ass noises like clicking sounds and it vibrates and shit and i can hear what sounds like a bb bouncing around inside my hub ive blown bottom bracket bearings before and it kinda sounds the same with the clicking and sound of lose bbs bouncing around and idk how to take out the axle cuz there is no nut or anything its just round and smooth idk if ive gotta hammer it out or what so i know i really iam not 100 percent sure there blown but im hopeing thats the problem and i wanna make sure and i wanna atleast know how to take it apart that was the question i was asking cuz i dont wanna fuck up my hub anymore than it is by trying to hammer out and its not like a normal hub the bolts screw inside the axle
Posts: 1
Joined: 12/19/2009
Location: Pasadena, CA USA
Ressler711 wrote:Then why'd you post?
Anyways it should be the same as most hubs. Take out everything till you get the bearins. It's really ...more
i'm new to this forum, but i'm not new to people who post thousands of times that know sh*t about absolutely nothing. i'm trying to find out how to bust the vandero 2 open as well and i'm probably gonna have to take it to my friends at the bike shop, which is irritating, because i'd like to do it right now, in my house. but, what's more irritating is having people like you act all snide, like you know what you're talking about, dishing out on other people who are trying to find honest help. no sh*t you should lay the parts out, but if it were so simple, you would've laid out a helpful suggestion ON HOW TO ACTUALLY TAKE THE F*CKING THING APART. it's not the same as most hubs, smarty pants.
Posts: 4332
Joined: 3/22/2009
Location: Brookfield, IL USA
kinkyfit7777 wrote:take the locknuts off and the dust covers than ohh its female nvm i dont know
Ressler711 wrote:Then why'd you post?
Anyways it should be the same as most hubs. Take out everything till you get the bearins. It's really ...moretellingyouWHAT'sUP wrote:i'm new to this forum, but i'm not new to people who post thousands of times that know sh*t about absolutely nothing. i'm ...more
chances are if he hasn't gotten it apart yet, he's an idiot. just for future reference, try not to post on something more than probably a week old, unless you have a really good reason for it.
Posts: 3991
Joined: 9/28/2009
Location: Norwich, GBR
Posts: 3
Joined: 9/28/2011
Location: GBR
you take the nuts of the sides so you are left with the cones, slide the cones off each side of the hub, once youve done that your left with the axel pokin out both sides with the bearing stuck in the hub, you simply get a mallet wack one side of the axel as hard as you can and one bearing will pop out and then you do the same for the other side then your left with the axel.
Posts: 3240
Joined: 5/20/2011
Location: Mooresville, NC USA
Posts: 2118
Joined: 11/11/2010
Location: AUS
Posts: 1803
Joined: 11/10/2010
Location: Linden, MI USA
Really? 2009? r u fucking serious?
BROC RAIFORD BIKE CHECK
Gucci Bike check BURRR
Lee_Rager, Beastassdick, Dolphin, scram hype, BMX4thahaters,Ron44ald,future FBM, NickRidesAlot
Matt at Randy Wise
Posts: 3207
Joined: 2/15/2011
Location: Detroit, MI USA
mattjmuldoon@hotmail.com wrote:Really? 2009? r u fucking serious?
This. People are fucking retarded.....
Refs: Wade. Beastassdick. ScramHype Lee_Rager(x7) Spikez5 TCBmx Dolphin
With seller feedback and ref on Bmx-forum.com and PBNation.com. WhiteKinght
Posts: 494
Joined: 6/8/2010
Location: USA
Posts: 11068
Joined: 7/8/2009
Location: La Grange Park, IL USA
almost 2 years old*
refs- Tommyboy,mandingo215, lobo173, prophet,iridebmxeveryday,ctbmx86,1of1547,Warchol2,white knight,branBMX94,JakeSalbert
Subscribe to me on Youtube.
http://www.youtube.com/user/senika5634?feature=mhee
Posts: 3
Joined: 9/28/2011
Location: GBR
Posts: 1890
Joined: 10/3/2010
Location: MI, USA
yeah they are
Refs:
wade, ~stolen boy~, mattjmuldoon(x2), droogskul(x2), element4all, ron44ald, iridefly(x2), empath_, ajp62696, areanfsl, dontdeletemepleaseandthankyou, JakeSalbert, asilva23, bmx4life121303, TCbmx.
Posts: 27
Joined: 6/13/2011
Location: Norfolk, VA USA
Posts: 8421
Joined: 10/23/2010
Location: elyria, OH USA
it would be prejudice, not racism
I seek progression, not perfection.
Refs:Beastassdick
~Dk/oldschool908~TheLilozzy~jaypee23~Bstick~agfracing~MoyBoy5~RIDE a BIKE~wade5~Mattmuldoon@hotmail.com x2~jakebikes~ joe loves shadow~ diss diqq~ k1ng~fly for life x2~spikez5~four~jb07~mike duda~ DORbmx~ bobPA~superstarDK
