Posts: 10
Joined: 8/1/2021
Location: Tyler, TX USA
I'm installing a new BB for a Shaun White Session 1.7 and the cups are giving me a very very difficult time coming off. I've hammering them using a screwdriver and a mallet to get them to budge from the opposite side of each cup and nil results. I did much research on the net and most of them cover another type of BB. Many thanks in advance.
CD
Bepis w/o vegetal
Thamks
Kalm
Posts: 3228
Joined: 9/15/2019
Location: MI, USA
Try harder
It is not because things are difficult that we do not dare, it is because we do not dare that they are difficult: Seneca
Posts: 3111
Joined: 4/1/2019
Location: GBR
Don't use a screw driver. Use a socket extension and a metal hammer. You can spray a load of wd40 or something on it first which might help. But a good hard tap should pop em out
Posts: 10
Joined: 8/1/2021
Location: Tyler, TX USA
Posts: 10
Joined: 8/1/2021
Location: Tyler, TX USA
UPDATE: PROBLEM SOLVED
Used a Dremel and a simple ceramic cutting disc and created a slot through each cup then used a mallet + screwdriver to finish the opening. Cups practically fell out. Thanks everyone.
CD
Bepis w/o vegetal
Thamks
Kalm
Posts: 21
Joined: 8/15/2021
Location: Roseburg, OR USA
Corvus Dominus wrote:UPDATE: PROBLEM SOLVED
Used a Dremel and a simple ceramic cutting disc and created a slot through each cup then used a mallet ...more
Science!
