ideal grind box

Related:
Create New Tag

8/23/2011 9:15 PM

i plan on making a box soon and was wondering if anyone had suggestions for things like height length or width or other suggestions like certain building materials

|

8/23/2011 11:22 PM

make it 8 feet long by 3 feet wide and right about wheel height with a taller wall on one side thats about stem height and 8 feet long too

|

I HAVE A PAIR OF BLACK ODDY 7KAS I WILL TRADE BOTH FOR A PAIR OF SUN ENVYS (MUST BE FRONT AND REAR MATCHING SET) ANY COLOR

8/24/2011 9:34 AM

i was thinking like ten feet long and like a foot and a half tall maybe?

|

8/27/2011 2:12 PM

cultmember wrote:

i was thinking like ten feet long and like a foot and a half tall maybe?

10 feet is a good length but 18 inches wont be high enough to learn some tricks on, or do tricks off. That's why what Iride said is a good idea. You still get the low side to dial in basic tricks and then you have the high side to dial them in.

18" will work though.

|

8/27/2011 10:18 PM

18 works for just grinds if i could i would have angled mine.

if you can i would do 12' long and have it angled from 18 inch to 24 to 30 inchs.

|

8/28/2011 8:14 AM

is that what you had the 2x4's under yours for?

|

8/28/2011 10:12 AM

so you can ride on it yes. plus there will be tims you fall towards the ledge and you dont wanna fall thru the plywood.

|