Cranks won't slide through new BB

Related:
Create New Tag

9/9/2016 4:22 PM

Odyssey thunderbolt spindle will not slide through BSD mid BB. brand new bottom bracket, cleaned and greased the spindle, but spindle will not slide in far enough to put crank arm on. Tried wacking it in with piece of wood and mallet for a good 15 minutes, but no luck. Any suggestions or thoughts as to why this is happening ??? sad

|

9/16/2016 4:09 AM

Wrong size bb? The odyssey cranks have a 22mm axle. Sounds like your bb is 19mm

|