Tech Tips: Fixing Flat Tires 11

Everybody hates a flat! Brian makes it seem a little easier to get your BMX bike pumped up and running again.

Credit: VitalBMX
Create New Tag
  • beast.reality31

    3/6/2012 11:00 AM

    no sand paper creates the smoother surface but you have to go over it a couple times the metal one doe the same thing just in a different fashion.

  • ChanelBMX

    2/11/2011 8:50 PM

    I'm right. The scourer is to rough the tube up, and u should always leave the glue till it barely sticks to ur finger when u touch it, so its almost dry.

  • keironw74

    6/21/2010 11:48 AM

    @piclejuice if you had to wait for the glue to dry before you put the patch on it wouldnt stick

  • piclejuice

    2/26/2010 9:50 AM

    Iam pretty sure that you have to wait for the glue to dry before you put on the patch

  • gazzbmx

    11/16/2009 6:51 PM

    the metal scourer is for the chalk, it dries the glue out stopping it sticking to your tire.

  • Welshy11

    10/30/2009 3:27 AM

    he is a bloody pro bmx'er im sure he knows how to fix a flat :D channel bmx is shit

  • brad93

    10/22/2009 6:56 AM

    also i was told that the longer you let the glue sit, the better

  • Kambo57

    6/7/2009 6:58 PM

    lololololooolooooooolololololololollooloollol u took a knife out sorry i thought that was humorous

  • peoplethewe

    6/5/2009 8:27 PM

    chanelbmx... your right, brian is a dumb dumb


    5/10/2009 7:34 AM

    doesnt load

  • ChanelBMX

    5/6/2009 11:53 PM

    i thought the sand paper was to create a rough surface for the glue to stick to as opposed to a smooth surface....Thats why some kits give u a metal scourer

Show More Comment(s) / Leave a Comment